Version 8.0 Revision Date 01/20/2021 Print Date 02/09/2021

SECTION 1: Identification of the substance/mixture and of the company/undertaking

1. 1. Product identifiers

Product name              : Bromocresol green indicator ACS,Reag. Ph

Eur

Product Number            : 1.08121

Catalogue No.              : 108121

Brand                          : Millipore

CAS-No.                      : 76-60-8

1. 2. Relevant identified uses of the substance or mixture and uses advised against

Identified uses              : Reagent for analysis

1. 3. Details of the supplier of the safety data sheet

Company                    : EMD Millipore Corporation 400 Summit Drive

BURLINGTON MA 01803 UNITED STATES

Telephone                    : +1 800-645-5476

1. 4. Emergency telephone

Emergency Phone #      : 800-424-9300 CHEMTREC (USA) +1-703-

527-3887 CHEMTREC (International) 24

Hours/day; 7 Days/week

SECTION 2: Hazards identification

1. 1. Classification of the substance or mixture

Not a hazardous substance or mixture.

1. 2. GHS Label elements, including precautionary statements

Not a hazardous substance or mixture.

1. 3. Hazards not otherwise classified (HNOC) or not covered by GHS - none

SECTION 3: Composition/information on ingredients

3.1    Substances

Formula                      : C21H14Br4O5S

Molecular weight            : 698.04 g/mol

CAS-No.                      : 76-60-8

Millipore - 1.08121                                                                                                                        Page 1 of 8

EC-No.                        : 200-972-8

No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures

1. 1. De script ion of first-aid measures If inhaled

After inhalation: fresh air.

In case of skin contact

In case of skin contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower.

In case of eye contact

After eye contact: rinse out with plenty of water. Remove contact lenses.

If swallowed

After swallowing: make victim drink water (two glasses at most). Consult doctor if feeling unwell.

1. 2. Most important symptoms and effects, both acute and  delay ed

The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11

1. 3. Indication of any immediate medical attention and special treatment needed

No data available

SECTION 5: Firefighting measures

1. 1. Extinguishing media Suitable extinguishing media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

1. 2. Special hazards arising from the substance or mixture

Carbon oxides Sulfur oxides

Hydrogen bromide gas Combustible.

Fire may cause evolution of:

hydrogen bromide, Sulfur oxides

Development of hazardous combustion gases or vapours possible in the event of fire.

1. 3. Advice for firefighters

In the event of fire, wear self-contained breathing apparatus.

1. 4. Further information

Suppress (knock down) gases/vapors/mists with a water spray jet. Prevent fire extinguishing water from contaminating surface water or the ground water system.

Millipore - 1.08121                                                                                                                        Page 2 of 8

SECTION 6: Accidental release measures

1. 1. Personal precautions, protective equipment and emergency procedures Advice for non-emergency personnel: Avoid inhalation of dusts. Evacuate the danger area, observe emergency procedures, consult an expert.

For personal protection see section 8.

1. 2. Environmental precautions

Do not let product enter drains.

1. 3. Methods and materials for containment and cleaning up

Cover drains. Collect, bind, and pump off spills. Observe possible material restrictions (see sections 7 and 10). Take up dry. Dispose of properly. Clean up affected area. Avoid generation of dusts.

1. 4. Reference to other sections

For disposal see section 13.

SECTION 7: Handling and storage

1. 1. Precautions for safe handling

For precautions see section 2.2.

1. 2. Conditions for safe storage, including any incompatibilities Storage conditions

Protected from light.Tightly closed. Dry.

Storage temperature: no restrictions.

Storage class (TRGS 510): 11: Combustible Solids

1. 3. Specific end use(s)

Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection

1. 1. Control parameters

Ingredients with workplace control parameters

Contains no substances with occupational exposure limit values.

1. 2. Exposure controls

Appropriate engineering controls

Change contaminated clothing. Wash hands after working with substance.

Personal protective equipment Eye/face protection

Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Safety glasses

Skin protection

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Millipore - 1.08121                                                                                                                        Page 3 of 8

Full contact

Material: Nitrile rubber

Minimum layer thickness: 0.11 mm Break through time: 480 min

Material tested:KCL 741 Dermatril® L

This recommendation applies only to the product stated in the safety data sheet, supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves (e.g. KCL GmbH, D-36124 Eichenzell, Internet: www.kcl.de).

Splash contact Material: Nitrile rubber

Minimum layer thickness: 0.11 mm Break through time: 480 min

Material tested:KCL 741 Dermatril® L

Respiratory protection

Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Control of environmental exposure

Do not let product enter drains.

SECTION 9: Physical and chemical properties

1. 1. Information on basic physical and chemical properties
      1. Appearance              Form: solid Color: green
      2. Odor                      characteristic
      3. Odor Threshold        No data available
      4. pH                          No data available

1. 1. 5. Melting

point/freezing point

1. 1. 6. Initial boiling point and boiling range

Melting point/range: 217 - 218 °C (423 - 424 °F) No data available

1. 1. 7. Flash point                ()No data available
      8. Evaporation rate        No data available

1. 1. 1. Flammability (solid, gas)

1. 1. 10. Upper/lower flammability or explosive limit s

No data available No data available

1. 1. 11. Vapor pressure        No data available

1. 1. 50. Vapor density          No data available

1. 1. 1000. Relative density        No data available
      14. Water solubility          insoluble

Millipore - 1.08121                                                                                                                        Page 4 of 8

• • • Partition coefficient: n-octanol/water
    • Autoignition temperature
    • Decomposition temperature

log Pow: 7.86 - Potential bioaccumulation No data available

No data available

1. 1. 18. Viscosity                  No data available
      19. Explosive properties  No data available
      20. Oxidizing properties    No data available
   2. Other safety information

Bulk density              350 kg/m³

SECTION 10: Stability and reactivity

1. 1. Reactivity

The following applies in general to flammable organic substances and mixtures: in correspondingly fine distribution, when whirled up a dust explosion potential may generally be assumed.

1. 2. Chemical stability

The product is chemically stable under standard ambient conditions (room temperature).

1. 3. Possibility of hazardous reactions Violent reactions possible with: Strong oxidizing agents

1. 4. Conditions to avoid

no information available

1. 5. Incompatible materials

No data available

1. 6. Hazardous decomposition products

In the event of fire: see section 5

SECTION 11: Toxicological information

1. 1. Information on toxicological effects Acute toxicity

No data available Inhalation: No data available Dermal: No data available No data available

Skin corrosion/irritation

No data available

Serious eye damage/eye irritation

No data available

Millipore - 1.08121                                                                                                                        Page 5 of 8

Respiratory or skin sensitization

No data available

Germ cell mutagenicity

No data available

Carcinogenicity

IARC:      No ingredient of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.

NTP:      No ingredient of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.

OSHA:    No component of this product present at levels greater than or equal to 0.1% is on OSHA’s list of regulated carcinogens.

Reproductive toxicity

No data available No data available

Specific target organ toxicity - single exposure

No data available

Specific target organ toxicity - repeated exposure

No data available

Aspiration hazard

No data available

1. 2. Additional Information

Not available

To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

SECTION 12: Ecological information

1. 1. Toxicity

No data available

1. 2. Persistence and degradability

No data available

1. 3. Bioaccumulative potential

No data available

1. 4. Mobility in soil

No data available

1. 5. result s of PBT and vPvB assessment

PBT/vPvB assessment not available as chemical safety assessment not required/not conducted

1. 6. Other adverse effects

No data available

Millipore - 1.08121                                                                                                                        Page 6 of 8

SECTION 13: Disposal considerations

13.1 Waste treatment methods Product

Waste material must be disposed of in accordance with the national and loc No mixing

with other waste. Handle uncleaned containers like the product See www.retrologistik.com for processes regarding the return of chemicals and containers, or contact us there if you have further questions.

SECTION 14: Transport information DOT (US)

Not dangerous goods

IMDG

Not dangerous goods

IATA

Not dangerous goods

Further information

Not classified as dangerous in the meaning of transport regulations.

SECTION 15: Regulatory information SARA 302 Components

This material does not contain any components with a section 302 EHS TPQ.

SARA 313 Components

This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.

Massachusetts Right To Know Components

No components are subject to the Massachusetts Right to Know Act.

Millipore - 1.08121                                                                                                                        Page 7 of 8